Watch Dog^™ Wipe Out^® Porous Surface Graffiti Remover

Watch Dog^™ Wipe Out^® Porous Surface Graffiti Remover is a fast acting, extremely effective,biodegradable graffiti remover/cleaner specifically designed to remove heavy graffiti from all "porous" non-painted surfaces such as brick, mortar, cement, stucco, pavers and natural stone surfaces such as granite, marble, sandstone or brownstone. Watch Dog^™ Wipe Out^® Porous Surface Graffiti Remover system has a non-drip gel formula that clings to the vandalized or graffitied surface for fast maximum speed of removal.  Watch Dog^™ Wipe Out^® Porous Surface Graffiti Remover works in most cases in less than 30 minutes.  Watch Dog^™ Wipe Out^® Porous Surface Graffiti Remover has the ability to draw out graffiti from within the most minut pores for complete removal without the ghosting and shadowing effect of many of our competitors.  Watch Dog^™ Wipe Out^® Porous Surface Graffiti Remover covers approximately 100-125 square feet per gallon.  Watch Dog^™ Wipe Out^® Porous Surface Graffiti Remover is available in quarts, one gallon and five gallon pails.

LIMITATIONS AND ANTI-GRAFFITI PREP WORK

Watch Dog^™ Wipe Out^® Porous Surface Graffiti Remover’s efficiency is greatly reduced during cold weather. Surface and air temperature should be a minimum of 40° F during use of product. Test areas should be done that are typical of the surface being cleaned to ensure that the results will be satisfactory. This will also help the first time user of the product to gauge the time frame for removal.  Watch Dog^™ Wipe Out^® Porous Surface Graffiti Remover should be brushed, rolled or sprayed onto the surface being cleaned. Allow approximately 15 to 30 minutes for the Watch Dog^™ Wipe Out^® Porous Surface Graffiti Remover to work and then use either a pressure washer or a nylon scrub brush to agitate the product on the surface to help the graffiti cleanup process. Be sure to completely remove the Watch Dog^™ Wipe Out^® Porous Surface Graffiti Remover from the surface.  If the surface that has been cleaned with Watch Dog^™ Wipe Out^® Porous Surface Graffiti Remover is to be painted, our Citri-Lize^™ Neutralizer and Mill Glaze Remover must be used to reduce the pH of the Watch Dog^™ Wipe Out^® Porous Surface Graffiti Remover.

FEATURES AND BENEFITS

• Safe, non-drip, environmentally friendly formulation.
• Water-based formulation.
• Low odor, low VOC.
• Single application, easy removal of existing graffiti.
• Removes adhesives, paint spills, caulking, epoxies, urethanes and most aerosol spray paints.