Peel Away® Marine Strip
Peel Away® Marine Strip is specifically designed as an alternative to Peel Away® Marine Safety Strip for removing marine bottom, antifouling paint where the epoxy barrier coat is to be left intact. Peel Away® Marine Strip is an alkaline paste and in a single application will strip all antifouling coatings on boats without harsh fumes or flammable solvents. Peel Away® Marine Strip is a safe and environmentally friendly lead-based paint removal system that includes a paste that is troweled or sprayed with a HD airless sprayer over the surface to be stripped. Peel Away® Marine Strip paste is then covered with our Dumond® Laminated Paper which controls evaporation and is left on until all of the paint is dissolved. The Dumond® Laminated Paper is then removed with the bulk of the paste and coatings adhering to it. The stripped surface should then be washed with clean water. Neutralize the surface using our new Citri-Lize™ neutralizer included in the kit. There is no special ventilation needed with this non-toxic, green product. Peel Away® Marine Strip paint remover does not contain methylene chloride, MEK or any other highly flammable solvents and easily clings to a vertical or overhang surface. Peel Away® Marine Strip covers approximately 20 square feet per gallon.
Features and Benefits
- One application can remove 30+ coats of paint.
- Formulated without methylene chloride or flammable solvents; does not generate any hazardous fumes or odors.
- Non-toxic, non-carcinogenic, and nonflammable; Zero VOC.
Dumond Product Guide
Marine Strip II MSDS
Marine Strip II Tech Data
Test Patch Instructions
Magazine Articles and Press Releases