 |
 |
|
|||||
|
|
|||||
| PEEL AWAY 1 | |||
  The
PEEL AWAY I System is an environmentally safe method of removing up to Thirty
two (32) layers of paint in a single application from most surfaces and
there are NO FUMES AND NO FLAMMABLE SOLVENTS. The System includes a paste
that is spread or sprayed over the surface to be stripped and then covered
with a fibrous laminated paper with controls evaporation, and is left on
until all of the paint is dissolved for easy collection of the waste. The
laminated paper is then removed with the bulk of the paste and paint adhering
to it and the stripped surface is washed clean and neutralized. PEEL AWAY
I works best when oil/lead based paint is the prime coating on the surface.
Coverage is 15-20 sq. feet per gallon
PEEL AWAY I is especially suited for the removal of lead based paint and restoration of old historical buildings. THREE MAJOR ADVANTAGES FOR USING PEEL AWAY I FOR LEAD PAINT REMOVAL ARE: 1)
By applying the PEEL AWAY paper over the paste, the paint is kept in a
wet or damp state preventing hazardous lead particles from getting into
the air or onto the surrounding area. |
|||
| PEEL AWAY SMART STRIP | |||
 A
revolutionary paint remover that is safe for the user, the substrate and
the environment. This 100% biodegradable, water-based stripper is extremely
effective for removing multiple layers of architectural and industrial coatings
from virtually all interior/exterior surfaces - wood, brick, metal, concrete,
stone, plaster, fiberglass, etc. Smart Strip does not contain methylene
chloride, caustic, or toxic chemicals. It is odor free. Smart Strip is exceptional
for the safe removal of lead based paint and is excellent for intricate,
carved or molded surfaces. It is also great for removing marine paints without
damaging the gel coat. Because it is a paste, Smart Strip can easily be
applied by brush, roller or conventional airless sprayer. It is formulated
to remain wet and effective over extended periods of time and does not require
the use of Peel Away Paper. Although the use of Peel Away Paper will accelerate
the removal process and extend dwell time.
|
|||
| PEEL AWAY ST-1 | |||
| PEEL
AWAY ST-1 has been specifically formulated for removal of lead based paint
from steel structures such as tanks,
bridges and structural members. PEEL AWAY ST-1 is similar to PEEL AWAY I
however its self-sealing characteristic allows it to continue working in
a moist environment without requiring any PEEL AWAY cover. Coverage is 20
sq . feet per gallon.
PEEL AWAY ST-1 is applied by trowel or spray with a dwell time of up to 24 hours. Removal is done using broad knives followed by a low pressure, low volume rinse minimizing liquid waste. LEAD
ABATEMENT ON STEEL STRUCURES |
|||
| PEEL AWAY 2 | |||
| PEEL
AWAY 2 is a solvent (methylene Chloride) based paste designed specifically
for removal of high strength two part epoxy coatings, urethanes, elastomerics,
chlorinated rubber, mastics, non-skid coatings etc. PEEL AWAY 2 is the strongest
chemical remover on the market and will remove multiple layers of paint
in 2-4 hours. PEEL AWAY 2 works best when covered with the PEEL AWAY paper
to prevent evaporation from taking place. Coverage is 30-35 sq. feet per
gallon. Specifications And Data Material Safety Data Sheets |
|||
| PEEL AWAY 4 | |||
| PEL
AWAY 4 is an acetic acid based paint/coatings remover that has been designed
specifically for the removal of lime/white wash coatings, zinc or inorganic
zinc coatings and some cementitious coatings. PEEL AWAY 4 can also remove
some high temperature aluminum coatings. Coverage is 35-40 sq. feet per
gallon. Specifications And Data Material Safety Data Sheets |
|||
| PEEL AWAY 5 | |||
| PEEL
AWAY 5 is an environmentally safe paint remover used for the removal of
high strength chemically resistant FLOOR coatings (epoxies, urethanes etc.)
PEEL AWAY 5 is a gel product applied by squeegee, brush or sprayer and removed
by long handled scrapers or power washing. Coverage is 60-70 sq. feet per
gallon.
PEEL
AWAY 5 is also available in pure form for use in dipping tanks as an alternative
to methylene chloride strippers. |
|||
| PEEL AWAY 6 | |||
 PEEL
AWAY 6 is an environmentally safe, user friendly paint remover that is specially
formulated to remove multiple layers of paint from all surfaces. It especially
good for removing varnishes and paint from fine furniture or hardwood where
the color of the wood is to be kept natural or stained. PEEL AWAY 6 will
remove coatings without raising the grain or discoloring the wood. Coverage
is 40-50 sq. feet per gallon.Specifications And Data Material Safety Data Sheets |
|||
| PEEL AWAY 7 | |||
 ARCHITECTURALPEEL AWAY 7 is an environmentally safe paint remover used to remove oil and latex paint. It is a stronger than the PEEL AWAY 6, especially at removing oil or lead paint from wood to be kept natural color after stripping. PEEL AWAY 7 could be used indoors or outdoors and is highly recommended for exterior cedar or redwood shakes because it creates no moisture on the surface being stripped. It is excellent for carved and molded surfaces. Coverage is 40-50 sq. feet per gallon. see related article INDUSTRIAL
|
|||
| PEEL AWAY 21 | |||
 PEEL
AWAY 21 is the safest remover on the market. It is used without the PEEL
AWAY paper and will remove 4-6 layers of latex and oil paint from any surface
in 1 application. It will also remove multiple layers of varnish, etc. Coverage
is 35-40 sq. feet per gallonSpecifications And Data Material Safety Data Sheets |
|||
| PEEL AWAY MARINE SAFETY STRIP | |||
 PEEL
AWAY MARINE SAFETY STRIP is an environmentally safe paint remover used for
the removal of bottom paint from fiberglass, wood and metal boats without
any damage to the surface. It will remove up to 10 layers of bottom paint
in ONE application. The product also works well at removing varnishes, polyurethane,
shellac etc from fine wood surfaces i.e. teak, mahogany etc. Coverage is
40 sq. feet per gallon. Marine ApplicationSpecifications And Data Material Safety Data Sheets |
|||
| PEEL AWAY MARINE STRIP II | |||
PEEL
AWAY MARINE STRIP II is an alternative to PEEL AWAY MARINE SAFETY STRIP
when you are removing bottom paint and the epoxy barrier coat is to be
left intact. This product will remove multiple layers of bottom paint
in ONE application, but will not effect the barrier coating, so you can
repaint without the need to re-epoxy. Coverage is 20 sq. feet per gallon. |
|||
| PEEL AWAY NEUTRALIZER | |||
| PEEL
AWAY NEUTRALIZER is an acetic acid solution used to reduce the pH levels
on surfaces where the PEEL AWAY I or ST-1 product was used. Since PEEL AWAY
I and ST-1 are alkaline strippers and have a high pH level, it is necessary
to use the PEEL AWAY Neutralizer to reduce the pH levels. PEEL AWAY Neutralizer
is a concentrate, which is diluted with water and sprayed on to the surface.
Coverage is 200 sq. feet per gallon. Specifications And Data Material Safety Data Sheets |
|||
If you have questions or comments, please contact us. Copyright © 1999 Dumond Chemicals, Inc. |