The
PEEL AWAY I System is an environmentally safe method of removing up to Thirty
two (32) layers of paint in a single application from most surfaces and
there are NO FUMES AND NO FLAMMABLE SOLVENTS. The System includes a paste
that is spread or sprayed over the surface to be stripped and then covered
with a fibrous laminated paper with controls evaporation, and is left on
until all of the paint is dissolved for easy collection of the waste. The
laminated paper is then removed with the bulk of the paste and paint adhering
to it and the stripped surface is washed clean and neutralized. PEEL AWAY
I works best when oil/lead based paint is the prime coating on the surface.
Coverage is 15-20 sq. feet per gallon
PEEL AWAY I is especially suited for the removal of lead based paint and restoration of old historical buildings.
THREE MAJOR ADVANTAGES FOR USING PEEL AWAY I FOR LEAD PAINT REMOVAL ARE:
1)
By applying the PEEL AWAY paper over the paste, the paint is kept in a
wet or damp state preventing hazardous lead particles from getting into
the air or onto the surrounding area.
2) When the stripping job is finished and the PEEL AWAY paper is removed,
the bulk of the paste and lead paint comes off intact onto the PEEL AWAY
paper for easy collection of the waste and proper disposal.
3) The PEEL AWAY I product contains lime which starts to stabilize the
lead paint being removed and there is a good chance that the solid waste
(PEEL AWAY and paint) will be under 5ppm leachable lead taking it out
of a hazardous category in terms of disposal. A TCLP test is done to make
this determination. see
related article
A
revolutionary paint remover that is safe for the user, the substrate and
the environment. This 100% biodegradable, water-based stripper is extremely
effective for removing multiple layers of architectural and industrial coatings
from virtually all interior/exterior surfaces - wood, brick, metal, concrete,
stone, plaster, fiberglass, etc. Smart Strip does not contain methylene
chloride, caustic, or toxic chemicals. It is odor free. Smart Strip is exceptional
for the safe removal of lead based paint and is excellent for intricate,
carved or molded surfaces. It is also great for removing marine paints without
damaging the gel coat. Because it is a paste, Smart Strip can easily be
applied by brush, roller or conventional airless sprayer. It is formulated
to remain wet and effective over extended periods of time and does not require
the use of Peel Away Paper. Although the use of Peel Away Paper will accelerate
the removal process and extend dwell time.
PEEL AWAY ST-1 is applied by trowel or spray with a dwell time of up to 24 hours. Removal is done using broad knives followed by a low pressure, low volume rinse minimizing liquid waste.
LEAD
ABATEMENT ON STEEL STRUCURES
Since
PEEL AWAY ST-1 is keeping the lead paint in a damp state, minimum containment
is required. Average waste generated by using PEEL AWAY ST-1 for lead
paint removal is 1-55 gallon Drum for every 1200 sq. feet.
Specifications
And Data
Material
Safety Data Sheets
Specifications And Data
Material Safety Data Sheets
Specifications And Data
Material Safety Data Sheets
PEEL
AWAY 5 is also available in pure form for use in dipping tanks as an alternative
to methylene chloride strippers.
Specifications
And Data
Material
Safety Data Sheets
PEEL
AWAY 6 is an environmentally safe, user friendly paint remover that is specially
formulated to remove multiple layers of paint from all surfaces. It especially
good for removing varnishes and paint from fine furniture or hardwood where
the color of the wood is to be kept natural or stained. PEEL AWAY 6 will
remove coatings without raising the grain or discoloring the wood. Coverage
is 40-50 sq. feet per gallon.Specifications And Data
Material Safety Data Sheets
ARCHITECTURALPEEL AWAY 7 is an environmentally safe paint remover used to remove oil and latex paint. It is a stronger than the PEEL AWAY 6, especially at removing oil or lead paint from wood to be kept natural color after stripping. PEEL AWAY 7 could be used indoors or outdoors and is highly recommended for exterior cedar or redwood shakes because it creates no moisture on the surface being stripped. It is excellent for carved and molded surfaces. Coverage is 40-50 sq. feet per gallon. see related article
INDUSTRIAL
PEEL AWAY 7 is an environmentally safe paint remover that has been specifically
formulated to remove high strength chemically resistant coatings i.e.
epoxies, urethanes, chlorinated rubber, elastomeric, aluminum, vinyl's,
mastics automobile paints and marine coatings. There is NO methylene chloride
or caustic or any other flammable solvent in the product. PEEL AWAY 7
has been used on large industrial applications to remove epoxy and urethane
coats from metal and masonry surfaces including marine and aerospace.
PEEL AWAY 7 can be used with or without the PEEL AWAY paper.
Specifications
And Data
Material
Safety Data Sheets
PEEL
AWAY MARINE SAFETY STRIP is an environmentally safe paint remover used for
the removal of bottom paint from fiberglass, wood and metal boats without
any damage to the surface. It will remove up to 10 layers of bottom paint
in ONE application. The product also works well at removing varnishes, polyurethane,
shellac etc from fine wood surfaces i.e. teak, mahogany etc. Coverage is
40 sq. feet per gallon. Marine ApplicationSpecifications And Data
Material Safety Data Sheets
PEEL
AWAY MARINE STRIP II is an alternative to PEEL AWAY MARINE SAFETY STRIP
when you are removing bottom paint and the epoxy barrier coat is to be
left intact. This product will remove multiple layers of bottom paint
in ONE application, but will not effect the barrier coating, so you can
repaint without the need to re-epoxy. Coverage is 20 sq. feet per gallon.
Marine
Application
Specifications
And Data
Material
Safety Data Sheets
Specifications And Data
Material Safety Data Sheets