Watch Dog^™ Wipe Out^® Porous Surface Graffiti Remover

Removing graffiti from brick, concrete, and other porous surfaces is a safe and easy process with Watch Dog™ Wipe Out® Porous Surface Graffiti Remover from Dumond Chemicals. As a fast acting, effective, and biodegradable graffiti removal and cleaning product, Watch Dog™ Wipe Out® Porous Surface Graffiti Remover is designed to safely remove heavy graffiti from all non-painted, porous surfaces such as brick, mortar, cement, stucco, and pavers as well as natural stone surfaces such as granite, marble, sandstone or brownstone.

In less than 30 minutes, the Watch Dog™ Wipe Out® Porous Surface Graffiti Remover non-drip gel formula clings to the spray painted surface and works to remove the graffiti fast. This specially formulated graffiti removal product has the ability to draw out sprayed-on paint from within the smallest surface pores without creating the ghosting and shadowing effect that many competing products leave behind.

How to Remove Spray Paint Graffiti with Wipe Out®

Watch Dog™ Wipe Out® Porous Surface Graffiti Remover is available in quarts, one gallon and five gallon pails, and for every gallon of Watch Dog™ Wipe Out® Porous Surface Graffiti Remover, approximately 100-125 square feet of porous surface can be covered for paint removal. Note that Watch Dog™ Wipe Out® Porous Surface Graffiti Remover’s efficiency is greatly reduced during cold weather. When using this product, be sure both surface and air temperature is a minimum of 40° F.

1. Before applying Watch Dog™ Wipe Out® Porous Surface Graffiti Remover over an entire area, the surface should be tested to ensure quality results and to gauge the time frame for graffiti removal. 
2. Brush, roll or spray the graffiti remover over the surface being cleaned.
3. Wait approximately 15 to 30 minutes to allow Watch Dog™ Wipe Out® Porous Surface Graffiti Remover formula to work its magic.
4. Use either a pressure washer or a nylon scrub brush to agitate the product on the surface.  
5. Be sure to completely remove all remnants of the Watch Dog™ Wipe Out® Porous Surface Graffiti Remover from the surface after the paint has been removed. 
6. Once the graffiti has been removed, use Dumond’s Citri-Lize™ Neutralizer and Mill Glaze Remover to reduce the pH of the Watch Dog™ Wipe Out® Porous Surface Graffiti Remover, especially if the surface is to be painted post-graffiti removal.

FEATURES AND BENEFITS

• Safe, non-drip, environmentally friendly formulation.
• Low odor and low VOC
• Easy removal of existing graffiti in one single application
• Removes adhesives, paint spills, caulking, epoxies, urethanes and most aerosol spray paints