Safe n' Easy® Metal Restorer
Safe n' Easy® Metal Restorer is a non-toxic cleaning product that does not contain any bleach, abrasives, petroleum distillates, caustic, hydrofluoric or muriatic acid. Specially formulated to act as a green clean solutionfor restoring metal surfaces, Safe n' Easy® Metal Restorer works to quickly remove oxidation, hard water stains, rust, mineral deposits, grease and other contaminates from copper, brass, bronze, stainless steel, aluminum and glass. In addition to cleaning metal, Safe n' Easy® Metal Restorer contains an inhibitor that acts as a barrier against corrosive agents to prevent rust and oxidation from reforming. The inhibitor produces a corrosive resistant film to protect the surface. This film cannot be wiped off, but it’s not detected by touch and won’t affect the surface appearance.
How to use Safe n' Easy® Metal Restorer
As with any new green cleaning product, the solution should be tested on a small area of the surface to ensure effectiveness. Once applied to the surface, Safe n' Easy® Metal Restorer should be left for several minutes and then agitated before rinsing thoroughly. Safe n' Easy® Metal Restorer covers approximately 150-200 square feet per gallon and is available in one gallon and five gallon pails.
FEATURES AND BENEFITS
- Ready-to-use, non-toxic formula
- Water-based and eco-friendly cleaning product
- Low odor, Low VOC.
- Extremely fast and effective in converting rust and oxidation from most metal substrates